info@centralmoloneyinc.com

(870) 534-5332

Three-Phase Pad Mount Distribution Transformers

Quality is at the core of Central Moloney, Inc., from our people, to our manufacturing processes and to our “can-do” attitude of producing reliable Three-Phase Pad Mounted Distribution Transformers for our customers.

Our three-phase pad mount distribution transformers are designed and manufactured in compliance with all applicable ANSI and RUS industry standards and/or customer specification.

 

Standard Features & AccessoriesOptional Features, Accessories and Design StandardsProduct ScopeFactory Stocking Program
threephasepadmount1

  Cabinet secured to tank with 300 series stainless studs

  Removable doors and sill

  Three point door-latching mechanism with penta head bolt

  Steel barrier separating high and low voltage compartments

  Access to high voltage compartment via penta head bolt(s)

  Tank equipped with four (4) lifting lugs and jacking provisions

  Tank and cabinet painted Munsell 7GY3.29/1.5 Green

  Zinc rich primer

  High voltage bushings are externally clamped universal wells

  Low voltage bushings are externally clamped with ANSI spades

  Removable neutral ground strap on low voltage neutral bushing

  One-inch oil fill plug

  One-inch oil drain plug

  Half-inch liquid level plug

  Automatic pressure relief valve

  Externally operated H0 Disconnect (WYE-WYE)

  Accessory parking stands (Dead-Front Only)

  Door stop rods

  Tank grounding provisions (1 in HV, 1 in LV)

threephasepadmount2

  Draw-out expulsion fuses with isolation links or internal expulsion fuses

  Non-metallic drip shield

  Draw-out full range current limiting fuse

  Internal partial range current limiting fuse with internal or draw-out expulsion fuses

  Draw-out, non-loadbreak current limiting fuses, with interlocking loadbreak switch

  Loadbreak or non-loadbreak high voltage bushing inserts

  Integral high voltage bushings

  Low voltage bushing connectors or non-standard ANSI spades

  Dual voltage switch

  Delta-WYE switch

  Tap changer switch

  Loadbreak sectionalizing switch

  Pressure/vacuum gauge

  Temperature gauge

  Liquid level gauge

  FR3 Fluid

  Drain valve with sampling device

  Handhole(s) with tamper-resistant cover

  DOE Efficiency Ruling compliant designs available

  30 kVA through 2500 kVA

  Primary voltages from 2400 through 34,500 (200 kV BIL)

  Secondary voltages 600 volts and below

At Central Moloney, we consistently strive to go above and beyond in order to bring our customers the best products and value in the marketplace. Our staff and management are composed of individuals with unique and unmatched experience.

Whether you are planning a requirement for one or one-hundred three phase pad mounted transformers, Central Moloney is ready to discuss your needs.

Brochure
Instruction Manual